How Much Does It Cost to Paint a Garage Door in Minneapolis?

Quick Answer

Treat that as a reference point, not a quote: garage doors need more prep per square foot than flat siding, and small jobs usually carry a minimum charge, so an actual quote often lands at or above the top of that range. Request a free estimate for the firm number on your door.

Cost to Paint a Garage Door

Here’s what Aries’s published exterior rate works out to for standard garage door sizes:

*Calculated from Aries’s exterior rate ($1.50–$4.00/sq ft, per the interior-painting-cost page’s FAQ) applied to actual door square footage — not a garage-door-specific quote. A door in good condition, painted as-is, tends to land toward the low end; rust spots, peeling paint, or dents that need scraping and spot-priming push a job toward the high end or above it, since small, detail-heavy jobs often carry a minimum charge that a straight per-sq-ft rate doesn’t capture.

Worked Example: A Standard Single-Car Garage Door

A typical single-car garage door is about 9 feet wide by 7 feet tall — 63 sq ft of surface. At Aries’s published $1.50–$4.00/sq ft exterior rate:

A two-car door at roughly 16′ × 7′ (112 sq ft) runs about $170 to $450 across that same rate, before accounting for any minimum job charge or extra prep.

What Affects the Cost

DIY vs. Professional

Painting a garage door yourself is one of the more approachable DIY exterior projects — it’s a single, flat-ish surface and doesn’t require a ladder the way siding or trim does.

Where DIY jobs usually go wrong is prep: skipping rust treatment or priming on bare metal leads to peeling within a season, and spraying without proper masking can overspray onto the driveway or house siding.

A professional garage door painter brings the right primer for the specific material, controlled spray or back-roll technique, and a finish that’s meant to hold up through Minnesota winters — worth the difference in cost if the door sees direct sun or road salt spray.

Frequently Asked Questions